Person weaving on a traditional loom, creating a colorful carpet.

Turkish rug weaver in KonyaIn traditional households, women and girls take up carpet and kilim weaving as a hobby as well as a means of earning money. Women learn their weaving skills at an early age, taking months or even years to complete the pile rugs and flat woven kilims that were created for their use in daily life.[43][44]MaterialseditMakers of handmade rugs use only natural fibres. The most common materials used for the pile are wool, silk and cotton. Nomadic and village weavers sometimes also use goat- and camel-hair. Traditionally, spinning is done by hand. Several strands of yarn are then pliedtogether so that the resulting yarn is strong enough to be used for weaving.
Sheep's wool is the most frequently used pile material in a Turkish rug because it is soft, durable, easy to work with and not too expensive. It is less susceptible to dirt than cotton, does not react electrostatically, and insulates against both heat and cold. This combination of characteristics is not found in other natural fibers. Wool comes from the coats of sheep. Natural wool comes in colors of white, brown, fawn, yellow and gray, which are sometimes used directly without going through a dyeing process, sheep's wool also takes dyes well. Traditionally, wool used for Turkish carpets is spun by hand. Before the yarn can be used for weaving, several strands have to be twisted together for additional strength.Cotton is used primarily in the foundation, the warps and wefts of rugs. Cotton is stronger than wool, and, when used for the foundation, makes a carpet lie flat on the ground, as it is not as easily distorted as woolen strings. Some weavers, such as Turkomans, also use cotton for weaving small white details into the rug in order to create contrast.Wool-on-wool (wool pile on wool warp and weft): This is the most traditional type of Anatolian rug. Wool-on-wool carpet weaving dates back further and utilizes more traditional design-motifs than its counterparts. Because wool cannot be spun extra finely, the knot count is often not as high as seen in a "wool-on-cotton" or "silk-on-silk" rug. Wool-on-wool carpets are more frequently attributed to tribal or nomadic production.Wool-on-cotton (wool pile on cotton warp and weft): This particular combination facilitates a more intricate design-pattern than a "wool-on-wool carpet", as cotton can be finely spun which allows for a higher knot-count. A "wool-on-cotton" rug is often indicative of a town weaver. Due to their higher pile density, wool-on-cotton carpets are heavier than wool-on-wool rugs.Silk-on-silk (silk pile on silk warp and weft): This is the most intricate type of carpet, featuring a very fine weave. Knot counts on some superior-quality "silk-on-silk" rugs can be as high as 28×28 knots/cm2. Knot counts for silk carpets intended for floor coverings should[citation needed] be no greater than 100 knots per square cm, or 10×10 knots/cm2. Carpets woven with a knot count greater than 10×10 knots/cm2 are intended to be used as a wall or pillow tapestry, because their fabric is less resistant to mechanical stress. These very fine, intricately-woven rugs and carpets are usually no larger than 3×3 m.


Historic photo of women working on a traditional carpet loom in a workshop, surrounded by various weaving materials and tools, with men standing nearby.

Turkish (roller beam) loom and weavers (1908).

Close-up illustration of triaxial weave pattern with red and beige threads.


Turkish (symmetric) knot

Illustration of a knitted fabric structure with interlocking loops in red and gray yarns.

Persian (asymmetric) knot, open to the right

Kilim end and fringes

A variety of tools are needed in the construction of a handmade rug. A loom, a horizontal or upright framework, is needed to mount the vertical warps into which the pile nodes are knotted, and one or more shoots of horizontal wefts are woven ("shot") in after each row of knots in order to further stabilize the fabric. Wefts can be either undyed or dyed, mostly in red and blue.The pile knots are usually knotted by hand. Most rugs from Anatolia utilize the symmetrical Turkish double knot. Each knot is made on two warps. With this form of knotting, each end of the pile thread is twisted around two warp threads at regular intervals, so that both ends of the knot come up between two strands on one side of the carpet. The thread is then pulled downwards and cut with a knife.After a row of knots has been inserted, one or two, sometimes more, rows of wefts are woven in, and the fabric is compacted by beating with a heavy comb. Once the carpet is finished, it is cut from the loom. The sides or selvages are usually overcast in wool. The selvages consist of up to ten warp threads. Especially village and nomadic rugs have flat-woven kilim ends, sometimes including pile-woven tribal signs or village crests. The pile of the carpet is shorn with special knives in order to obtain an equal surface. In some carpets, a relief effect is obtained by clipping the pile unevenly. Finally, the carpet is washed before it is used, or goes to the market.The upright pile of Turkish rugs usually falls in one direction, as knots are always pulled down before the string of pile yarn is cut off and work resumes on the next knot, piling row after row of knots on top of each other. When touching a carpet, this creates a feeling similar to stroking an animal's fur. This can be used to determine where the weaver has started knotting the pile. The pile in Turkish carpets is usually between 2 and 4 mm thick. Coarse nomadic rugs like the Yürük rugs, can be as thick as 12 mm. A special bedding carpet called yatak may reach a pile thickness of 20 to 25 mm.